Disk Manager is a hard disk drive installation utility that provides the following features:
-Fast and easy hard drive installation using the most commonly installed configuration choices.
-Make full use of the FAT32 File System if your operating system supports it. Formats drives larger than 2GB with one partition.
-Break the 8.4GB barrier. Install IDE/ATA drives larger than 8.4GB as a single bootable partition using the FAT32 File System, or as multiple FAT12/16 partitions. (SCSI and other types of drives may be installed to BIOS capacity.)
-Fast Format for IDE/ATA/SCSI drives. Completely installs drives in less than one minute in most cases.
Copyright
2001 ONTRACK Data International, Inc.
DMDOS002 Inc.
DMDOS002&
Selecting A Hard Disk Drive To Install
During installation, Disk Manager will display a list of all hard drives attached to your computer. Select the hard disk drive you wish to set up from the device list and press "Next" to continue the installation.
Copyright
2001 ONTRACK Data International, Inc.
Selecting An Operating System
During installation, Disk Manager requires you to select the operating system you are currently using or will be using so it can properly determine what file system type to use.
If you are not installing the new drive as your boot drive, then select the operating system you are currently booting to.
If you are installing the new drive as your boot drive, select the operating system that you plan to install.
The selection of the Operating System will determine the type and number of partitions Disk Manager will create.
- For Windows 95/95a/Dos, Disk Manager will create a number of equally sized FAT16 Partitions. Disk Manager will create more than one partition if the drive is larger than 2 GB. (2 GB is the maximum size for a FAT16 partition)
-For Windows 98/2000/Me Disk Manager will create one large FAT32 partition equal to the total capacity of the hard drive.
- For Windows NT, Disk Manager will create one Fat16 Partition up to 2 GB in size.
Copyright
2001 ONTRACK Data International, Inc.
Installation SummaryY
Before Disk Manager installs your hard drive, it will present you with a summary of the settings it will use for installation. If you wish to change the settings, press the "Back" button and make a new selection, otherwise press the "Next" button to continue the installation.
**NOTE:
If the drive you are installing has existing partitions and data on it, a warning message will appear explaining that ALL EXISTING DATA WILL BE LOST if the installation is continued. If you wish to continue the installation, click "Erase" and then "Next".
Copyright
2001 ONTRACK Data International, Inc.nal, Inc.
Disk Manager License AgreementQ
LICENSE AGREEMENT: TERMS AND CONDITIONS OF USE
IMPORTANT NOTICE. Read this License Agreement carefully before downloading or using this Software. BY DOWNLOADING OR USING THIS SOFTWARE IN ANY WAY YOU ACKNOWLEDGE THAT YOU HAVE READ, UNDERSTAND AND AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THESE TERMS, DO NOT DOWNLOAD THIS SOFTWARE, DO NOT USE THIS SOFTWARE IN ANY WAY, AND PROMPTLY RETURN THE SOFTWARE (AND ALL WRITTEN MATERIALS AND CONTAINERS) TO THE PLACE WHERE YOU OBTAINED THEM OR DELETE OR DESTROY ANY COPIES OF THIS SOFTWARE IN YOUR POSSESSION.
LICENSE. ONTRACK Data International, Inc. or any subsidiary ("ONTRACK") grants you a non-exclusive, non-commercial personal use license to use this software and any associated documentation ("Software") as indicated herein. The Software is designed and licensed for use on a single computer. The Software is in "use" on a single computer when it has been loaded into temporary memory (i.e. RAM) or installed into permanent memory (e.g. hard disk or other storage device) of that computer. Use of the Software on multiple computers is not permitted. You may transfer your license rights to another with the written permission of ONTRACK, only under the following conditions: You must transfer a copy of this License Agreement, all documentation, and at least one complete, unaltered copy of the Software to the other party. You must, at the same time, either transfer all your other copies of the Software to the other party or destroy them.
OTHER RESTRICTIONS. You shall not: (a) remove any product identification, copyright notices, or other notices or proprietary restrictions from the Software; (b) transfer, rent, lease, sublicense, copy, or distribute the Software; (c) cause or permit reverse engineering, disassembly, decompilation or alteration of this software; or (d) permit use of the Software in a: (i) computer service business; (ii) network; (iii) timesharing; or (iv) multiple CPU or multiple user arrangement unless all CPUs and/or users are properly individually or site licensed by ONTRACK.
TERM. This License is effective until terminated. You may terminate it at any time by destroying the Software, together with all copies thereof. This license will also terminate if you fail to comply with any term or condition of this Agreement. Upon such termination, you agree to destroy the Software, together with all copies thereof.
COPYRIGHT/OWNERSHIP. This Software and its source code are proprietary products of ONTRACK and are protected by copyright and other intellectual property laws. The Software is licensed and not sold. You acquire only the right to use the Software and do not acquire any rights, express or implied, in the Software or media containing the Software other than those specified in this License. ONTRACK shall at all times retain all rights, title, interest, including intellectual property rights, in the Software and media.
TRADEMARKS. ONTRACK, DISK MANAGER, and other names of ONTRACK and ONTRACK products referred to herein are trademarks or registered trademarks of ONTRACK Data International, Inc. in the United States and/or other countries. All other brands and product names are trademarks or registered trademarks of their respective holders.
EXPORT RESTRICTIONS. You agree to comply fully with all laws and regulations of the United States and other countries (Export Laws) to assure that neither the Software, nor any direct products thereof are (1) exported, directly or indirectly, in violation of Export Laws, or (2) are used for any purpose prohibited by Export Laws, including, without limitation, nuclear, chemical, or biological weapons proliferation.
None of the Software or underlying information or technology may be downloaded or otherwise exported or reexported (i) into (or to a national or resident of) Cuba, Iraq, Libya, Yugoslavia, North Korea, Iran, Syria or any other country to which the U.S. has embargoed goods; or (ii) to anyone on the U.S. Treasury Department's List of Specially Designated Nationals or the U.S. Commerce Department's Table of Denial Orders. By downloading or using the Software, you are agreeing to the foregoing and you are representing and warranting that you are not located in, under the control of, or a national or resident of any such country or on any such list.
DISCLAIMER OF WARRANTIES. THIS SOFTWARE IS DISTRIBUTED "AS IS" AND YOU, ITS USER, ASSUME ALL RISKS WHEN DOWNLOADING OR USING IT. THERE ARE NO WARRANTIES EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE. ONTRACK DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ONTRACK DOES NOT WARRANT THAT THE SOFTWARE IS NON-INFRINGING, THAT IT WILL MEET YOUR REQUIREMENTS OR THAT ITS OPERATION WILL BE UNINTERRUPTED, ERROR-FREE OR VIRUS FREE. IN NO EVENT SHALL ONTRACK BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (WHICH SHALL INCLUDE WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS OR PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) WHETHER BASED ON CONTRACT, TORT OR OTHER LEGAL THEORY, ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF ONTRACK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
GOVERNING LAW: You agree this Agreement shall be governed by the laws of the State of Minnesota, excluding (i) that body of law known as conflicts of law, and (ii) the United Nations Convention on Contracts for the Sale of Goods, and each party hereto submits to the exclusive jurisdiction of the Courts of that State. You further agree that this agreement is the complete and exclusive statement of the agreement between you and ONTRACK relating to the use of this Software.
U.S. GOVERNMENT RESTRICTED RIGHTS. In the event the Federal Acquisition Regulations (FAR) or DFARS is applicable to this Agreement, the Software is provided only with Restricted Rights as defined in paragraph 52.227-19 or paragraph 252.227-7013(c)(1)(ii), respectively (or a comparable or successor clause to either), as applicable.
Contractor/manufacturer is ONTRACK Data International, Inc.,
9023 Columbine Road, Eden Prairie, MN 55347.
Copyright (c) 2001 ONTRACK Data International, Inc.
DMDOS002
55347.
Copyright (c) 2000 ONTRACK Data International, Inc.
DMDOS002
Booting To Diskette
If your hard disk drive was installed with Ontrack's Dynamic Drive Overlay (DDO) you will need to follow the three steps below every time you want to boot from a diskette. If you do not follow this procedure, your operating system (OS) will be unable to access the hard drive correctly.
1) Remove the diskette from drive A:, if present.
2) Boot the system from the hard drive, pressing the SPACEBAR as soon as the blue Ontrack banner appears.
3) When prompted, insert your boot diskette in drive A: and press the SPACEBAR.
As an alternative, you can create an Ontrack Boot Diskette. This can be done by selecting the "Create DDO Diskette" option from the "Installation Complete" screen in Disk Manager.
NOTE: If you have just finished installing your boot drive, upon reboot, the Dynamic Drive Overlay will display a message requesting an operating system installation diskette and wait for you to press the SPACEBAR before proceeding.
Copyright
2001 ONTRACK Data International, Inc.esired.
Copyright
2000 ONTRACK Data International, Inc.ss is as described above.
Copyright
2000 ONTRACK Data International, Inc.ational, Inc.
Dynamic Drive Overlay (DDO)
A "Dynamic Drive Overlay" or DDO is a device driver that enables systems to overcome the limitations of their system BIOS. Without a DDO, some systems could not translate your drive properly and therefore you could not access the full capacity of your drive. DDO will load each time that you boot your computer.
Because DDO will now be part of the boot process you need to be aware of the system boot requirements. See the "Booting To Diskette" help topic for more information.
Copyright
2001 ONTRACK Data International, Inc.
Installation Complete ScreenO
After Disk Manager installs your new drive, you will need to reboot your computer in order to access your new partitions. Exit Disk Manager and press Ctrl-Alt-Del to reboot your computer.
If your drive was installed with the Dynamic Drive Overlay (DDO), select the "Create DDO Diskette" option from this screen. For more information, see the "Dynamic Drive Overlay" and "Booting To Diskette" help topics.
You can also choose to install another drive at this time by selecting the "Install Another Drive" option from this screen.
Copyright
2001 ONTRACK Data International, Inc.
Before running Disk Manager
Before running Disk Manager, you must physically install your hard drive. See your hardware documentation for additional support.
Copyright
2001 ONTRACK Data International, Inc.
tion package. No operating system diskettes are required to install a replacement boot hard drive with either a Windows 95 or Windows 98 bootable operating system with CD-ROM support - ready for full software installation using the Dell CD.
(.txt)